Please be patient while we continue to develop the "On-Line Service Center", and if the page you are looking for has not been developed, then check back soon.
Please be patient while we continue to develop our completed project gallery, and if the page you are looking for has not been developed, then check back soon.
Re-engineering and re-wiring of the DC battery distribution system for a customer's entire 51' Atlantic YachtRead more...
In this project we engineered and installed a custom breaker panel.Read more...
Compact, Affordable, Reliable Watermakers from 200 to 700 GPD
This option monitors and displays product water salinity eliminating the need for hand sampling or taste testing prior to putting water into your tanks. The digital readout will indicate whether the product water is "good" or "bad."
Used in conjunction with the 4009-UPGD this option adds another layer of convenience and protection by automatically diverting the Product Water to your tanks or overboard based on the salinity reading.
This option provides the operator the means to rinse the watermaker after every 7 days, without having to be onboard. Simply place the switch in the rinse position before leaving the boat or if you don't plan on using the watermaker for an extended period. As long as power and fresh water pressure are available to the unit, a fresh water rinse will occur immediately and then every 7 days after that until the switch is placed in the run position.
*Standard Test Conditions:Pressure: 900 PSI Source Water: Salinity 35,000 ppm, pH 7, temp. 77F/25C Product Flow: +/- 15% at standard conditions
Copyright © 2015 Kompletely Kustom Marine Inc.